How To Install and Secure phpMyAdmin on Ubuntu 18.04

Introduction #

While many users need the functionality of a database management system like MySQL, they may not feel comfortable interacting with the system solely from the MySQL command line client.
phpMyAdmin was created so that users can interact with MySQL through a web interface. In this guide, we’ll discuss how to install and secure phpMyAdmin so that you can safely use it to manage your databases on an Ubuntu 18.04 system.

Prerequisites #

To complete this tutorial, you will need the following:

A server running Ubuntu 18.04. This server should have a non-root administrative user with sudo privileges, as well as a firewall configured with UFW. To set this up, follow our initial server setup guide for Ubuntu 18.04.
A LAMP stack installed on your server. You can follow this guide on installing a LAMP stack on Ubuntu 18.04 to set this up.

Finally, there are important security considerations when using software like phpMyAdmin, since it:

Communicates directly with your MySQL installation
Handles authentication using MySQL credentials
Executes and returns results for arbitrary SQL queries

For these reasons, and because it is a widely-deployed PHP application which is frequently targeted for attack, you should never run phpMyAdmin on remote systems over a plain HTTP connection. If you do not have an existing domain configured with an SSL/TLS certificate, you can follow this guide on securing Apache with Let’s Encrypt on Ubuntu 18.04. This will require you to register a domain name, create DNS records for your server, and set up an Apache Virtual Host.
Once you are finished with these steps, you’re ready to get started with this guide.

Step 1 — Installing phpMyAdmin #

To get started, we will install phpMyAdmin from the default Ubuntu repositories.
First, update your server’s package index:

sudo apt update

Then use apt to pull down the files and install them on your system:

sudo apt install phpmyadmin php-mbstring php-gettext

This will ask you a few questions in order to configure your installation correctly.

Warning: When the prompt appears, “apache2” is highlighted, but not selected. To select Apache, hit SPACE, TAB, then ENTER.
If you do not hit SPACE to select Apache, the installer will not move the necessary files during installation.

For the server selection, choose apache2
Select Yes when asked whether to use dbconfig-common to set up the database
You will then be asked to choose and confirm a MySQL application password for phpMyAdmin

The installation process adds the phpMyAdmin Apache configuration file into the /etc/apache2/conf-enabled/ directory, where it is read automatically. The only thing you need to do is explicitly enable the mbstring PHP extension, which you can do by typing:

sudo phpenmod mbstring

Afterwards, restart Apache for your changes to be recognized:

sudo systemctl restart apache2

phpMyAdmin is now installed and configured. However, before you can log in and begin interacting with your MySQL databases, you will need to ensure that your MySQL users have the privileges required for interacting with the program.

Step 2 — Adjusting User Authentication and Privileges #

When you installed phpMyAdmin onto your server, it automatically created a database user called phpmyadmin which performs certain underlying processes for the program. Rather than logging in as this user with the administrative password you set during installation, it’s recommended that you log in as either your root MySQL user or as a user dedicated to managing databases through the phpMyAdmin interface.

Configuring Password Access for the MySQL Root Account #

In Ubuntu systems running MySQL 5.7 (and later versions), the root MySQL user is set to authenticate using the auth_socket plugin by default rather than with a password. This allows for some greater security and usability in many cases, but it can also complicate things when you need to allow an external program — like phpMyAdmin — to access the user.
In order to log in to phpMyAdmin as your root MySQL user, you will need to switch its authentication method from auth_socket to mysql_native_password if you haven’t already done so. To do this, open up the MySQL prompt from your terminal:

sudo mysql

Next, check which authentication method each of your MySQL user accounts use with the following command:

SELECT user,authentication_string,plugin,host FROM mysql.user;

+------------------+-------------------------------------------+-----------------------+-----------+
| user             | authentication_string                     | plugin                | host      |
+------------------+-------------------------------------------+-----------------------+-----------+
| root             |                                           | auth_socket           | localhost |
| mysql.session    | *THISISNOTAVALIDPASSWORDTHATCANBEUSEDHERE | mysql_native_password | localhost |
| mysql.sys        | *THISISNOTAVALIDPASSWORDTHATCANBEUSEDHERE | mysql_native_password | localhost |
| debian-sys-maint | *8486437DE5F65ADC4A4B001CA591363B64746D4C | mysql_native_password | localhost |
| phpmyadmin       | *5FD2B7524254B7F81B32873B1EA6D681503A5CA9 | mysql_native_password | localhost |
+------------------+-------------------------------------------+-----------------------+-----------+
5 rows in set (0.00 sec)

In this example, the root user does in fact authenticate using the auth_socket plugin. To configure the root account to authenticate with a password, run the following ALTER USER command. Be sure to change password to a strong password of your choosing:

ALTER USER 'root'@'localhost' IDENTIFIED WITH mysql_native_password BY 'password';

Then, run FLUSH PRIVILEGES which tells the server to reload the grant tables and put your new changes into effect:

FLUSH PRIVILEGES;

Check the authentication methods employed by each of your users again to confirm that root no longer authenticates using the auth_socket plugin:

SELECT user,authentication_string,plugin,host FROM mysql.user;

+------------------+-------------------------------------------+-----------------------+-----------+
| user             | authentication_string                     | plugin                | host      |
+------------------+-------------------------------------------+-----------------------+-----------+
| root             | *DE06E242B88EFB1FE4B5083587C260BACB2A6158 | mysql_native_password | localhost |
| mysql.session    | *THISISNOTAVALIDPASSWORDTHATCANBEUSEDHERE | mysql_native_password | localhost |
| mysql.sys        | *THISISNOTAVALIDPASSWORDTHATCANBEUSEDHERE | mysql_native_password | localhost |
| debian-sys-maint | *8486437DE5F65ADC4A4B001CA591363B64746D4C | mysql_native_password | localhost |
| phpmyadmin       | *5FD2B7524254B7F81B32873B1EA6D681503A5CA9 | mysql_native_password | localhost |
+------------------+-------------------------------------------+-----------------------+-----------+
5 rows in set (0.00 sec)

This output indicates that the root user will authenticate using a password. You can now log in to the phpMyAdmin interface as your root user with the password you’ve set for it here.

Configuring Password Access for a Dedicated MySQL User #

Alternatively, some may find that it better suits their workflow to connect to phpMyAdmin with a dedicated user. To do this, open up the MySQL shell once again:

sudo mysql

Note: If you have password authentication enabled, as described in the previous section, you will need to use a different command to access the MySQL shell. The following will run your MySQL client with regular user privileges, and you will only gain administrator privileges within the database by authenticating:

mysql -u root -p

From there, create a new user and give it a strong password:

CREATE USER 'sammy'@'localhost' IDENTIFIED BY 'password';

Then, grant your new user appropriate privileges. For example, you could grant the user privileges to all tables within the database, as well as the power to add, change, and remove user privileges, with this command:

GRANT ALL PRIVILEGES ON *.* TO 'sammy'@'localhost' WITH GRANT OPTION;

Following that, exit the MySQL shell:

exit

You can now access the web interface by visiting your server’s domain name or public IP address followed by /phpmyadmin:

http://your_domain_or_IP/phpmyadmin

Log in to the interface, either as root or with the new username and password you just configured.
When you log in, you’ll be taken to the phpMyAdmin user interface:

Now that you’re able to connect and interact with phpMyAdmin, all that’s left to do is harden your system’s security to protect it from attackers.

Step 3 — Securing Your phpMyAdmin Instance #

Because of its ubiquity, phpMyAdmin is a popular target for attackers, and you should take extra care to prevent unauthorized access. One of the easiest ways of doing this is to place a gateway in front of the entire application by using Apache’s built-in .htaccess authentication and authorization functionalities.
To do this, you must first enable the use of .htaccess file overrides by editing your Apache configuration file.
Use your favorite text editor to edit the linked file that has been placed in your Apache configuration directory. This example uses nano:

sudo nano /etc/apache2/conf-available/phpmyadmin.conf

Add an AllowOverride All directive within the <Directory /usr/share/phpmyadmin> section of the configuration file, like this:
/etc/apache2/conf-available/phpmyadmin.conf

<Directory /usr/share/phpmyadmin>
    Options FollowSymLinks
    DirectoryIndex index.php
    AllowOverride All
    . . .

When you have added this line, save and close the file. If you used nano to edit the file, do so by pressing CTRL + X, Y, and then ENTER.
To implement the changes you made, restart Apache:

sudo systemctl restart apache2

Now that you have enabled .htaccess use for your application, you need to create an .htaccess file to actually implement some security.
In order for this to be successful, the file must be created within the application directory. You can create the necessary file and open it in your text editor with root privileges by typing:

sudo nano /usr/share/phpmyadmin/.htaccess

Within this file, enter the following information:
/usr/share/phpmyadmin/.htaccess

AuthType Basic
AuthName "Restricted Files"
AuthUserFile /etc/phpmyadmin/.htpasswd
Require valid-user

Here is what each of these lines mean:

AuthType Basic: This line specifies the authentication type that you are implementing. This type will implement password authentication using a password file.
AuthName: This sets the message for the authentication dialog box. You should keep this generic so that unauthorized users won’t gain any information about what is being protected.
AuthUserFile: This sets the location of the password file that will be used for authentication. This should be outside of the directories that are being served. We will create this file shortly.
Require valid-user: This specifies that only authenticated users should be given access to this resource. This is what actually stops unauthorized users from entering.

When you are finished, save and close the file.
The location that you selected for your password file was /etc/phpmyadmin/.htpasswd. You can now create this file and pass it an initial user with the htpasswd utility:

sudo htpasswd -c /etc/phpmyadmin/.htpasswd username

You will be prompted to select and confirm a password for the user you are creating. Afterwards, the file is created with the hashed password that you entered.
If you want to enter an additional user, you need to do so without the -c flag, like this:

sudo htpasswd /etc/phpmyadmin/.htpasswd additionaluser

Now, when you access your phpMyAdmin subdirectory, you will be prompted for the additional account name and password that you just configured:

https://domain_name_or_IP/phpmyadmin

After entering the Apache authentication, you’ll be taken to the regular phpMyAdmin authentication page to enter your MySQL credentials. This setup adds an additional layer of security, which is desireable since phpMyAdmin has suffered from vulnerabilities in the past.

Conclusion #

You should now have phpMyAdmin configured and ready to use on your Ubuntu 18.04 server. Using this interface, you can easily create databases, users, tables, etc., and perform the usual operations like deleting and modifying structures and data.